Why Is My Car Drifting and Pulling?
If you’re driving around Maple Shade, Moorestown, or Cherry Hill and notice the car drifting and pulling to one side, there could be several reasons for it. It might have to do with the tires, or it could be an issue with the braking system.
We’ll go over several reasons why your car is drifting and pulling. Read through our informative guide, and contact us at Elite Acura if you need automotive service.
Pulling Just on Certain Roads
No matter what road you drive on, they won’t all be perfectly level. Most roads slant toward the side with drainage, to allow rain to run off. Because of this, vehicles will usually pull slightly in the direction of the slant.
This is perfectly normal, and doesn’t mean that your vehicle needs a wheel alignment. However, if your vehicle is pulling to the left or right on every road surface, then you may want to consider getting an alignment.
Tires will wear down over time from normal use. Since they don’t wear evenly, you need to get a tire rotation regularly. If not, one will wear out quicker than the others, causing the vehicle to pull to one side.
Tire separation can also cause your car to pull to one side. This is when air forces the belts to separate from the tire carcass. When this happens, the tire may unexpectedly fail, which can be very dangerous. Not only can it pull the car off to the side, but you may also experience a shake or shimmy within the vehicle, even at very low speeds.
Low Tire Pressure
If any tire is low on air, it’ll change in height, which will cause the wheel alignment to change. This will result in a pull. Plus, if the tire is very under-inflated, it’ll have more rolling resistance, which will make the pull more noticeable.
So, you’ll want to check air pressure in all the tires if the vehicle starts to pull. You’ll especially want to check the rear tires. This is because a low rear tire can change the front wheel alignment and cause a pull.
If the automobile only pulls when you apply the brakes, then there’s an issue with the braking system. For example, a brake hose distributes brake fluid to tires. If it gets clogged, the fluid will dispense unevenly to the tires, resulting in a pull.
Another example has to do with the brake calipers. They apply pressure to the brake pads, which ultimately brings the vehicle to a stop. If the calipers get stuck, there will be uneven pressure on the brakes, which will cause a slight pull to one side.
Schedule Automotive Service Today
Whatever the reason for the drifting and pulling, the issue will need to be taken care of as soon as possible. Luckily, our technicians have years of experience dealing with this automotive issue. Because of this, they can fix it quickly and efficiently, and get you back on the road as soon as possible.
So, if your vehicle is starting to drift and pull near Maple Shade, Moorestown, or Cherry Hill, don’t wait. Schedule service at Elite Acura today!